GKG G-Titan-SMT Printer
G-Titan | SMT Printer
Insight into the future
As the trade is getting more and more involved in Industry 4.0, it is understood that customers are also expecting to transform their operations, yielding higher productivity and competitiveness. Strategically equipped with OPC (Optimum-Paste Control), G-Titan makes your journey towards lights-out manufacturing a seamless one.
Complemented by QPC (Quality-Print Control), G-Titan firmly stands behind the belief that nothing is more important than a good print. These revolutionary changes to the fundamental aspects of the SMT printer will bring about an efficiency that you’ve never experienced before.
STANDARD FEATURES & PERFORMANCE
The paste is automatically dispensed across the entire squeegee length, maintaining at 15mm rolling diameter, adopting the common 500 grams’ solder paste jar. Completely eliminates the wastage of solder paste overflowing to the sides of squeegee.
Tracing solder paste rolling diameter in real time and trigger the auto dispensing if it falls below 10mm. Completely eliminate insufficient solder paste on stencil and keep the paste rolling speed within optimum range to achieve best printing result with this smt printer.
Retainers at both sides can be adjusted to the exact length of the PCB, enabling solder paste to be retained within the PCB length to obtain a clean sweep. Possess absolute control over desired printing area, to achieve best printing quality using this smt printer.
QUALITY PRINT CONTROL (QPC) - NOTHING IS MORE IMPORTANT THAN A GOOD PRINT
Stencil Aperture Inspection System
Using panel light installed at the top and CCD camera below to inspect stencil apertures. It automatically detects the clogging of stencil apertures to eliminate poor quality stencil being used, ensure quality printing right from the start.
The Stencil Lock sucks the stencil firmly on both sides of the conveyor during printing cycle. To eliminate stencil vibration by having firm contact with PCB. The PCB clamper is a combination of retractable top clamp and motor controlled side clamp, uniquely designed by GKG (patented). With these standard features, all of today’s available and challenging substrates can be securely clamped and print to the highest quality.
PRODUCT DIMENSION
What Are The Key Components Of A SMT Line?
Hanwha Receives Award for Component Placement – Multi-function during SMTA Guadalajara
